|
The machine is the third generation of product especially
for sensor. It is improved in view of the process of fine component
welding and the production quality of sensor to content the
demand of the sensor welding.
The machine has high reliability, easy to operate and maintain
and install, high welding quality, high rate of finished product,
small size, compact structure etc..
The numerical control work plane of the machine adopts PLC control
system. The machine is controlled by computer, and can depend
on different workpieces to choose corresponding work parameters
so that get desirable effect.
|
| [Technical parameters of the laser] |
1. Working medium of the laser ND: YAG
2. Wavelength of the laser: 1.064um
3. Output energy: 60J
4. Average out power: >=300W
5. Instability probability of the energy: <(-3% -- 3%)
6. Focus of the convex: 50--100mm
7. The diameter of facula after focusing: 0.3--2mm (adjustable)
8. Pulse width: 0.1ms--20ms (adjustable)
9. Pulse frequency: 1--100HZ (adjustable)
10. Pulse waveform: 20 kinds (adjustable)
11. Welding speed: 5mm/s---18mm/s
12. Welding depth: 0.5--3mm
|
| [Performance of the working table] |
1. The working table: Programmable PLC controller especially
for sensor and the working table
2. Area of the worktable (width * length): 300*300mm
3. Pulse equivalent of axis XY: 0.01mm
4. Fix accuracy: 0.01mm
5. Xenon lamp: Longevity and not blasting lamp
6. The cooling system: internal recycle with percolator
7. Consecutive working time: >24h
8. Observation system: Ultramicroscope with 10 multiple rate
of magnification. (Can adopt observation system of the same
axis)
|
[Working condition of the equipment]
|
1. Working temperature: 0--50c
2. Relative humidity: <70%
3. Power source: Three phases and four lines 8KVA
|
Equipment size: 1290mm*920mm*1300mm
|
Other applied areas: |
Space flight, Aviation, Power supply, Machinery, Battery, Electron,
Telecommunication, Sensor |
